7000mAh 60A 21700 Battery Cell with 200A Pulse for UAV Drone Power Tools
Henrid 21700 7000mAh 60A Battery Cell INR21700S-70P for UAV Drone Power Tools
- Ultra High 7000mAh Capacity : Typical 7000mAh rated 6860mAh, far higher than ordinary 21700 cells, greatly extend runtime for your devices without extra volume.
- 40A Continuous High Discharge : Support 40A max continuous discharge without temperature cut, 60A discharge with 80℃ protection, perfectly fit high power scenarios like power tools, e-bikes and high lumen flashlights. Extreme Pulse Performance : 200A 2s pulse discharge current, can handle instant high power peak demand without voltage drop.
- Industry Leading Energy Density : 350Wh/kg gravimetric and 994Wh/L volumetric energy density, achieve longer runtime under same battery pack size and weight.
- Excellent Cycle Life : 400 cycles under 7A charge/discharge at room temperature, still keep over 60% SOH, long service life for long term use.
- Wide Operating Temperature Range : Support charge from -10℃ to 60℃, discharge from -30℃ to 80℃, stable performance even in extreme cold or high temperature outdoor environments.
- Low Internal Resistance : AC impedance ≤5.5mΩ at 30% SOC, effectively reduce heat generation during high current discharge, improve overall safety.
- Strict Quality Control : Steel shell cylindrical structure, standard 21.35mm diameter and 70.8mm height, perfectly compatible with all mainstream 21700 battery holders and packs.
The Henrid INR21700S-70P is a high-energy 21700 cylindrical cell built for applications that prioritize maximum runtime without sacrificing power.
Delivering a typical 7000mAh capacity, this cell uses Henrid's multi-tab winding structure to balance high energy density (350Wh/kg) with strong power output. It supports 60A continuous discharge (with 80C surface temperature cutoff) and pulse currents up to 200A for 2 seconds. AC internal resistance stays at or below 5.5mOhm for lower heat generation under load.
The -30C to 80C discharge operating range makes it reliable for extreme environments, from winter inspection to outdoor robotics. Weighing 70.8+/-1.5g with dimensions of 21.35+/-0.15mm x 70.8+/-0.2mm, it fits standard 21700 pack designs.
Ideal for: high-range FPV drones, agricultural spraying UAVs, heavy-lift industrial drones, e-mobility (e-bikes and e-scooters), high-current power tools, robotics and large-capacity custom battery packs.
| Parameter | Specification |
|---|---|
| Chemistry | NMC (LiNiMnCoO2 / INR) |
| Typical Capacity | 7000mAh |
| Rated Capacity | 6860mAh |
| Nominal Voltage | 3.6V |
| Charge Cut-off | 4.2V |
| Discharge Cut-off | 2.5V |
| Max Continuous Discharge | 60A (with 80℃ temperature cut) |
| Standard Continuous Discharge | 40A (without temperature cut) |
| Pulse Discharge | 200A (2s), 170A (10s) |
| AC Impedance (30% SOC) | ≤5.5mΩ |
| DC Impedance | ≤18mΩ (1C 10s) |
| Standard Charge | 1C (7000mA) |
| Max Continuous Charge | 2C (14000mA) |
| Dimensions | 21.35±0.15mm (Diameter) × 70.8±0.2mm (Height) |
| Weight | 70.8±1.5g |
| Operating Temp (Charge) | -10℃ to 60℃ |
| Operating Temp (Discharge) | -30℃ to 80℃ |
| Cycle Life | 400 cycles at +7A/-7A with ≥60% SOH |
| Energy Density | 350Wh/kg (Gravimetric), 994Wh/L (Volumetric) |
70P vs 60P Quick Comparison:
Capacity: 70P is 7000mAh (Typical) / 60P is 6000mAh (Typical)
Weight: 70P is 70.8+/-1.5g / 60P is 68+/-1.5g
Standard Discharge: 70P is 40A / 60P is 40A (Note: 60P standard is 0.2C/1.4A, 70P standard is 0.2C/1.4A, Max continuous differs in some sheets)
Max Continuous Discharge: Both are 60A (with 80C cut)
Pulse Discharge: 70P is 200A (2s) / 60P is 160A (2s) (Check 60P sheet for exact pulse)
Energy Density: 70P is 350Wh/kg / 60P is 313Wh/kg
7000mAh 21700 Battery Cell
,60A 21700 Lithium Cell
,200A Pulse 21700 Battery Cell
-
DMEGC INR18650-29E 3.6V 2900mAh 3C Rechargeable 18650 Lithium Ion Battery 1000 Cycles
DMEGC INR18650-29E 3.6V 2900mAh lithium-ion battery delivers high discharge performance with 1000+ cycle life. Features ultra-low internal resistance for safety, UN38.3/IEC62133 certified. Ideal for power tools, e-mobility, and home appliances. -
CATL 3.2V 628Ah LiFePO4 Prismatic Battery Cell 8000 Cycles For Solar Energy Storage
CATL 3.2V 628Ah LiFePO4 2.009KWh prismatic battery cell for solar energy storage, UPS, and home appliances. Features 8000-cycle lifespan, -20~65℃ operating temperature, and liquid cooling system. Durable LiFePO4 cathode material ensures long-term reliability. -
11KW 48V Single-Phase Output Solar Inverter Hybrid Solar Inverter for Parallel Hybrid Solar System
11KW 48V single-phase hybrid solar inverter delivers 98% efficiency and 150A output for parallel systems. Durable 19KG build, 2-year warranty, and 220-240V/50-60Hz flexibility. Manufacturer since 2014 offers custom options and UL/CE certified reliability for global B2B export.