Henrid 21700 6000mAh 60A -40C High Drain Lithium Ion Battery Cell for UAV Drone FPV Pack Assembly
Henrid 21700 6000mAh 60A -40C High Drain Lithium Ion Battery Cell for UAV Drone FPV Pack Assembly
- 6000mAh + 60A in One Cell: Typical 6000mAh (min 5880mAh) with 60A continuous discharge (10C) — the only 21700 combining high capacity with true high-rate output. No trade-off between runtime and power.
- 110A Pulse (10s, 50% SOC): Handles aggressive throttle punches, climb-out and wind gust recovery without voltage collapse. ~18.3C burst capability for heavy-lift and FPV.
- Multi-Tab Design, ≤4.5mΩ ACIR: Multi-tab winding shortens current path inside the cell, cutting DC resistance and polarization heat. Less sag under load, more of the pack's energy actually reaches the motors.
- 313 Wh/kg Energy Density: 21.6Wh per cell at only 68±1.5g — longer flight time per gram versus standard 5000mAh 21700 cells.
- -40℃ to 80℃ Discharge Range: Cold-start capable at -40℃ where conventional 21700 cells hit cut-off instantly. Built for high-altitude, winter and polar-region operations.
- 1000-Cycle Durability: 1000 cycles at 6A/6A ≥80% capacity; 600 cycles at 6A/20A ≥60%. Passed GB31241-2022 safety tests (short circuit, overcharge, crush, impact, temperature cycling).
The Henrid INR21700S-60P is a high-power 21700 cylindrical cell built for UAV and drone battery packs that need both endurance and thrust.
Most 6000mAh 21700 cells top out at 12–20A continuous. The 60P delivers 60A continuous (10C) with an 80°C surface-temperature cutoff, and 110A pulse for 10 seconds at 50% SOC. That means a 6S1P pack can pull over 1.3kW without the voltage sag that normally forces pilots to land early.
Behind those numbers is a multi-tab winding structure: multiple tabs on both electrodes shorten the internal current path, which is why AC internal resistance stays ≤4.5mΩ and the cell runs cooler under sustained load. At 313 Wh/kg and 68±1.5g per cell, you get more flight time per gram of pack weight.
The -40℃ to 80℃ discharge range makes it usable where standard cells fail — high-altitude mapping, winter inspection, cold-chain logistics, polar and边防 operations. Cycle testing confirms 1000 cycles at 6A/6A with ≥80% capacity retention, and 600 cycles at 6A/20A with ≥60%.
Cell-level specs: 6000mAh typical / 5880mAh minimum, 3.6V nominal, 21.6Wh typical, 4.2V charge cut-off, 2.5V discharge cut-off, 8A max continuous charge. Dimensions 21.35±0.15mm * 70.8±0.2mm, green PVC sleeve, flat-top.
Ideal for: agricultural spraying drones, heavy-lift industrial UAVs, long-range FPV, VTOL, robotics, e-mobility and high-drain custom packs.
Note: This is an unprotected bare cell. Final packs must include a matched BMS, thermal management, structural enclosure and cell balancing before flight use. Always verify pack certification (UN38.3, MSDS) for your shipping route.
| Parameter | Specification |
|---|---|
| Cell Model | INR21700S-60P |
| Brand | Henrid |
| Typical Capacity | 6000mAh |
| Nominal Voltage | 3.6V |
| Typical Energy | 21.6Wh |
| Max Continuous Discharge | 60A (80℃ cut) |
| Pulse Discharge | 110A (10s) |
| Internal Resistance | ≤4.5mΩ |
| Operating Temp (Discharge) | -40 to 80℃ |
| Cycle Life | 1000 cycles ≥80% |
| Cell Weight | 68.0±1.5g |
| Structure | Multi-Tab / Tabless Design |
| Application | Long-Range UAV FPV Agricultural Drone |




6000mAh 60A High Drain 21700 Lithium Ion Cell
,110A Pulse 21700 Battery Cell
,-40℃ Low Temperature 21700 Cylindrical Cell
-
Samsung INR21700-50S 5000mAh Solid State 21700 Lithium Ion Battery 1000 Cycles For Electric Bicycles
Samsung 21700-50S 5000mAh solid state lithium battery with 1000-cycle life, -20℃~45℃ operating range, and 70g weight. Certified for boats, e-bikes, forklifts, and power systems. Custom options available. -
CATL LFP30 30Ah 3.2V LiFePO4 Battery Cell 4000 Cycles For Energy Storage Battery Pack
CATL LFP30 30Ah 3.2V 96Wh LiFePO4 battery cell for UPS, solar storage, and home appliances. Features 4000 cycles, -30~55℃ operating temperature, 640g weight, and liquid battery type with dimensions 100*21*140mm. -
Custom 18650 Rechargeable Lithium Ion Cell Battery Pack With BMS Protection
Custom 18650 rechargeable lithium-ion battery packs with BMS protection. Tailored voltage, capacity, and dimensions. Choose Li-ion for energy density or LiFePO4 for safety. Prototypes in 3-7 days, free technical support, flexible MOQ, and certified global shipping.